How to Fix a Pool Float

pool float

One of the saddest moments on a beautiful summer day is when your inflatable begins to deflate. Whether it’s a pool float, inflatable pool, boat tube or towable, air leaks are bound to happen. The thin vinyl is only so durable. But there’s good news — you don’t have to buy a new float every time this happens. Instead, you can extend the life of your float with a cheap, easy and sustainable option: repairing the leak.

Leaks can easily be identified and fixed with a few simple steps. This process also works for other seasonal items like inflatable pools, boat tubes and towables. All you need are the right tools, and your inflatables will be as good as new. Read these directions or watch the video below to learn just how easy this is to do at home.

Find the Leak

To determine where the air leak is coming from, start by fully inflating the float. You’ll need to leave the air in the float throughout the entire patching process as this makes it easier to repair. Once the float is fully inflated and the air valve is closed, you can determine the source of the leak through one of the following methods:

  1. Submerge the float in water. The leak will produce air bubbles in the water, making it easy to spot.
  2. Spray the area you think the leak is coming from with a cleaning product, then rub the cleaning product around. When you see bubbles consistently forming in one area, that is the air leak.

Once you find the source of the leak, cover it with a piece of tape or make a small mark over it so it can be easily identified when it’s time to make the repair. The float will then need to be completely dry before you begin patching it up.

Use the Right Tools

Before you can repair the leak, you will need to have the right patching tools on hand. Some inflatables come with a patch, or you may have to purchase a repair kit. You can also opt for a strong adhesive that’s not necessarily geared toward repairing leaks, like a shoe glue, depending on the size of the hole and the item you’re repairing. Whatever sealant you choose, just be sure that it’s flexible, strong and waterproof.

If you don’t use a patch, you will need duct tape to seal the hole. Just keep in mind that if the leak is on the seam of the inflatable, then duct tape and patches will not work due to the position.

Patch the Hole

Now that you’ve found the source of the leak and you’ve determined which tools you’re going to use to repair it, it’s time to patch up the hole.

Find the spot that you previously marked and generously apply the adhesive or sealant to the area. If using a patch or duct tape, make sure the piece is large enough to cover the surface area around the hole. Then, cover the hole with your patch or piece of duct tape.

Once the seal or patch has been applied, allow the area to completely dry before using the inflatable in water.

For visual, step-by-step instructions on repairing an inflatable leak, watch this short video: